CG-Hub

Tewicks · 04:07 AM

Hey guys, I haven't made a WIP thread in FOREVER! So to ensure I work to my full potential on this, I will be absorbing all of those awesome comments of criticism and encouragement and use them in the great struggle against procrastination!

So I have been working on this model on and off for a little while now. It's now the time to step it up to the next level and finish this bad boy. I just had to model this thing after playing Battlefield 3, such an amazing bird!

LATEST IMAGES

Tewicks · 12-06-2011, 10:12 PM

I managed to do a 12 hour stint yesterday on this. Got most of the panels in the right place. Now it's time to get to work on the wings!

Tewicks · 12-09-2011, 06:34 AM

Got to work on the blades and wings...

And here is a blinn and wire shot.

Tewicks · 12-16-2011, 10:38 AM

Hey guys! Don't be shy, if you wanna say hi you don't have to be afraid

Here's a little look into the detailing I have been doing for the tail rotors.

Tewicks · 12-20-2011, 12:54 AM

Hello my silent friends!

For now, here's an update on the rotorhead. It's nearing completeion, with probably a few tweaks to be done once I notice they are needed! Enjoy...

Tewicks · 12-20-2011, 05:28 AM

More close up

Existentialist · 12-21-2011, 11:16 PM

This is fantastic

djorzgul · 12-21-2011, 11:23 PM

It looks like a good wip

I'd be useful, for the sake of criticism, to post some references.

Mr_Cash · 12-31-2011, 01:21 PM

Very nice detail-work on the rotorhead, so funny to look at!
Are you going to bake that thing?

Tewicks · 01-13-2012, 11:11 PM

@Existentialist cheers man!

@djorzgul reference up in this post, that's a good idea. I will do some more comparison renders shortly!

@Mr_Cash thanks man, this will be a full high poly model, so no baking will be involved, I will be unwrapping and texturing it at some point also!

Happy New Year people! I have a sweet sweet update for you, the near to complete tail section!

And here is the reference image of the opposite side! (pretty much still the same)

Tewicks · 01-15-2012, 11:07 AM

So this is the detail-complete tail section. I am really happy with it! Now as I am currently unemployed my main goal is to get a 3D related job. So I am having to draw the line here and stop modelling the rest of the chopper for now and focus on getting the work I have done into my portfolio. This sadly means there may not be any updates from me for a week or so, getting a job and freelancing to survive are my main priorities!! After I finish some freelance work I plan to get back onto this project and finish off the modelling & texturing.

Full size: http://img72.imageshack.us/img72/662...ogress16fu.jpg

Full size: http://img706.imageshack.us/img706/4...ogress17fu.jpg

Bushmaster · 01-18-2012, 06:52 PM

That looks awesome. Hope to see some updates soon!

Tewicks · 02-01-2012, 12:12 PM

@Bushmaster - Thanks man, well here you go...

Hey guys,

Here's a bit of an update on the wing & weapons. I can finally shoot stuff with it...

AibarSoid · 02-01-2012, 03:47 PM

more more more more!
lol

Really great hardsurface work man
Thanks 4 share

Tewicks · 02-08-2012, 05:11 AM

@AibarSoid - yes yes yes! more to come

cheers bro

Here's a little update! Noticed a few faults with the geo in this render, but overall the area is pretty much done.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
high Poly Evil R2D2	jonfer	3D Finished Work	3	08-17-2011 12:52 PM
3d \| IdanI \| Tinker Bell gone bad	IdanI	CGHUB & Imagine FX Bobby Chiu's Fairytales Re-Imagined 2D & 3D Art Challenge	0	07-18-2011 07:56 PM
Advanced / High-End Poly Modeller (m/f)	realtime	Paid Jobs	0	05-17-2011 03:45 PM
Is this Workstation good enough for Zbrush High Poly modelling?	jonnyjohnson	Hardware	2	03-07-2010 09:39 PM
What can this use, besides more cow bell?	BeardNick	2D WIP	2	01-29-2010 06:05 AM

CG-Hub

Members login

General

Challenges

2D Corner

3D Corner

Bell AH-1Z Viper [High Poly]

Site Map

	Permalink #1
Tewicks Join Date: Dec 2010 Posts: 32 Member Thanks: 1 Thanked 3 Times in 3 Posts	Bell AH-1Z Viper [High Poly] 12-06-2011, 04:28 AM Hey guys, I haven't made a WIP thread in FOREVER! So to ensure I work to my full potential on this, I will be absorbing all of those awesome comments of criticism and encouragement and use them in the great struggle against procrastination! So I have been working on this model on and off for a little while now. It's now the time to step it up to the next level and finish this bad boy. I just had to model this thing after playing Battlefield 3, such an amazing bird! LATEST IMAGES Attached Images Last edited by Tewicks; 03-26-2012 at 04:07 AM.

	Permalink #2
Tewicks Join Date: Dec 2010 Posts: 32 Member Thanks: 1 Thanked 3 Times in 3 Posts	12-06-2011, 10:12 PM I managed to do a 12 hour stint yesterday on this. Got most of the panels in the right place. Now it's time to get to work on the wings!

	Permalink #3
Tewicks Join Date: Dec 2010 Posts: 32 Member Thanks: 1 Thanked 3 Times in 3 Posts	12-09-2011, 06:34 AM Got to work on the blades and wings... And here is a blinn and wire shot.

The Following User Says Thank You to Tewicks For This Useful Post:
AibarSoid

	Permalink #4
Tewicks Join Date: Dec 2010 Posts: 32 Member Thanks: 1 Thanked 3 Times in 3 Posts	12-16-2011, 10:38 AM Hey guys! Don't be shy, if you wanna say hi you don't have to be afraid Here's a little look into the detailing I have been doing for the tail rotors.

	Permalink #5
Tewicks Join Date: Dec 2010 Posts: 32 Member Thanks: 1 Thanked 3 Times in 3 Posts	12-20-2011, 12:54 AM Hello my silent friends! For now, here's an update on the rotorhead. It's nearing completeion, with probably a few tweaks to be done once I notice they are needed! Enjoy...

	Permalink #6
Tewicks Join Date: Dec 2010 Posts: 32 Member Thanks: 1 Thanked 3 Times in 3 Posts	12-20-2011, 05:28 AM More close up

	Permalink #7
Existentialist Join Date: Dec 2011 Posts: 2 Junior Member Thanks: 0 Thanked 0 Times in 0 Posts	12-21-2011, 11:16 PM This is fantastic

	Permalink #8
djorzgul Join Date: Aug 2010 Posts: 7 Member Thanks: 1 Thanked 0 Times in 0 Posts	12-21-2011, 11:23 PM It looks like a good wip I'd be useful, for the sake of criticism, to post some references.

	Permalink #9
Mr_Cash Join Date: Jul 2011 Posts: 49 Member Thanks: 1 Thanked 1 Time in 1 Post	12-31-2011, 01:21 PM Very nice detail-work on the rotorhead, so funny to look at! Are you going to bake that thing? __________________ Portfolio Blog

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

	Permalink #10
Tewicks Join Date: Dec 2010 Posts: 32 Member Thanks: 1 Thanked 3 Times in 3 Posts	01-13-2012, 11:11 PM @Existentialist cheers man! @djorzgul reference up in this post, that's a good idea. I will do some more comparison renders shortly! @Mr_Cash thanks man, this will be a full high poly model, so no baking will be involved, I will be unwrapping and texturing it at some point also! Happy New Year people! I have a sweet sweet update for you, the near to complete tail section! And here is the reference image of the opposite side! (pretty much still the same)

	Permalink #11
Tewicks Join Date: Dec 2010 Posts: 32 Member Thanks: 1 Thanked 3 Times in 3 Posts	01-15-2012, 11:07 AM So this is the detail-complete tail section. I am really happy with it! Now as I am currently unemployed my main goal is to get a 3D related job. So I am having to draw the line here and stop modelling the rest of the chopper for now and focus on getting the work I have done into my portfolio. This sadly means there may not be any updates from me for a week or so, getting a job and freelancing to survive are my main priorities!! After I finish some freelance work I plan to get back onto this project and finish off the modelling & texturing. Full size: http://img72.imageshack.us/img72/662...ogress16fu.jpg Full size: http://img706.imageshack.us/img706/4...ogress17fu.jpg

	Permalink #12
Bushmaster Join Date: Dec 2011 Posts: 65 Member Thanks: 1 Thanked 1 Time in 1 Post	01-18-2012, 06:52 PM That looks awesome. Hope to see some updates soon!

	Permalink #13
Tewicks Join Date: Dec 2010 Posts: 32 Member Thanks: 1 Thanked 3 Times in 3 Posts	02-01-2012, 12:12 PM @Bushmaster - Thanks man, well here you go... Hey guys, Here's a bit of an update on the wing & weapons. I can finally shoot stuff with it...

	Permalink #14
AibarSoid Join Date: Mar 2011 Posts: 13 Member Thanks: 5 Thanked 0 Times in 0 Posts	02-01-2012, 03:47 PM more more more more! lol Really great hardsurface work man Thanks 4 share

	Permalink #15
Tewicks Join Date: Dec 2010 Posts: 32 Member Thanks: 1 Thanked 3 Times in 3 Posts	02-08-2012, 05:11 AM @AibarSoid - yes yes yes! more to come cheers bro Here's a little update! Noticed a few faults with the geo in this render, but overall the area is pretty much done.