- 'Artemis -Cybernetic Organism-' (3D)
& 16 new images by Sengjoon !!!
- '300: Rise of an Empire - Big Wave' (2D)
& 4 new images by j_Stone !!!
- 'Chase' (3D)
by Essex !!!
- 'The Discovery' (3D)
& 3 new images by alp !!!
- 'biyao' (2D)
by zs1985 !!!
- CharacterFORGE 3D :: ROUND 029 :: INDUSTRIAL LIGHT MAGIC (3D)
Vote for your favorite entry !
||Thread Tools||Display Modes|
Join Date: Aug 2010
Thanked 2 Times in 2 Posts
Tutorial: Pre-Rendered Fur Tiles for Texturing
06-09-2011, 04:17 AM
Some friends asked me to write a tutorial for my fur texturing technique. Figured I'd post it here. Maybe it'll be new to a few folks. Hope you like!
In this tutorial, I'll teach you to make nifty fur tiles for use in texturing your models. You will see how having full control of the look and flow of your fur without painting can be incredibly useful, and how you can use the technique to achieve many different looks easily.
You can go about pre-rendering your fur in many ways, with many different packages. Since I am a Maya-user, I will use Maya Fur to explain this texturing method. If you've never used Maya Fur before, I'd suggest you go over the free introduction to Maya Fur videos at digital-tutors.com. They explain it better than I ever could. If you're already experienced with Fur, then go ahead and skip ahead to "Setting Up Your Tiles". Here are the videos I will refer to:
Digital-Tutors > Introduction and Project Overview
Digital-Tutors > Loading the Fur Plug-in and Overview
*pay special attention to combining fur descriptions and blending them at different percentages, and the difference between the two.
Digital-Tutors > Light Models, Fur Density and Global Scale
*pay special attention to the color attributes, and how to use them together. Below I will give you a tip on how to achieve more accurate colors by using ramps.
Digital-Tutors > Assigned Surfaces and Attaching Fur
*pay special attention to assigning the same fur descriptions to multiple surfaces
These short-but-informative videos will bring you up to speed and have you cooking-out quality fur in no time.
Obviously, it is incredibly important to do research on the kind of fur you want to use. How thick is the fur? Does the fur have lots of clumps and tangles? Where does the excess fur gather? How does the fur change lengths around the body? Gathering appropriate reference, and figuring this stuff out now is key.
One pun down; nailed it
There are a few things I've learned about getting better looking fur. I'm no expert by any means, and there are plenty more ways to improve the look of your fur, but here are some tips to start you off.
Blending the Fur Presets
In the 2nd video [@7:10], you'll see that blending different fur presets at different percentages can allow you to mix-up the fur you want. The idea here is to minimize the time you spend changing attributes around and render testing. Time is money. Experimenting with all the presets, and how they mix together, can build up to become a vast library of Fur designs you have to choose from. Try to identify the characteristics of each fur preset that set them apart, and use those specifics to your advantage when blending.
FYI: The math I used when making fur for my Alpha Dog
Using Color Ramps
The color channels you have by default can limit the depth of your fur, but by adding more variation with color ramps, you can add depth and personality to each channel. A ramp allows you to control the falloff between the colors which allows you to get much more accurate looks. I will now show you how to use a ramp for the "Base Color" of this squirrel description:
3-Layers of Fluffy
Each fur design will usually need three layers of descriptions per tile. The layers add depth and variety to the fur design. I'll briefly explain the layers and their differences here:
As you see, getting quality fur is a job in itself. The next section will teach you how to identify what kind of fur tiles you need, and how to go about producing texture-ready fur patches with embedded alpha channels.
First, we'll need some good flat NURBS shapes to use as tiles. Go over your reference and attempt to pick out simple shapes in the fur's pattern. More than likely, you'll go with something like I have here:
In this picture, you see a basic lighting setup with two spotlights, and the fur tiles I used for my Alpha Dog spread out. Each shape was made from a NURBS plane with the CVs pushed around a bit. You may have to boost the divisions to get more complicated shapes, but most tiles will need only subtle adjustments. Moving these CVs will change how the hair gathers. The diamond and the spoon shapes will give you all of your frayed hairs on your texture.
Attach your fur descriptions to each of these shapes, then hide the NURBS surface to show only the fur. Fine tune your lighting, and render settings, then render from the top view. You may want render angles later with perspective, but keep it on a situational basis. You'll end up with something like this:
Feel free to just use these for practice if you like
Remember to save your render in the .png format so you can retain the alpha channel and bring it into photoshop. You won't need to render huge tiles, and you'll actually want to keep the render resolution at or under 640x480 since you will be scaling them down when layering tiles. Remember that you can always come back and make more tile shapes if you need them. Just assign the fur description(s) to the new shape, and you're ready to rock.
Booya; I'm pun-tastic
Okay, so you have fur all tiled up and ready. Now what?
I have my Photoshop texture file ready with the areas I'm planning to add fur to marked with a base color layer. The base color will vary on the design you're going for, but keep the color solid for now and you can make adjustments later, if needed.
Now we bring in our fur tiles and go to work. You probably already have a good idea what to do next, and you're exactly correct. Layer your tiles accordingly to create the fur design you need. Remember to never scale your fur with free transform as it will blur the tile, and you'll lose alot of intensity. You'll need to make several copies of each piece to create the fur texture, so blend the different tile layers by using an eraser with a speckled brush along the edges. It takes some getting used to, but once you get the hang of it, you can lay out huge sections of fur quickly.
You can use your eraser on a low opacity setting to basically change the flow and direction of the hair in addition to just blending. As you can see, the layer panel will get messy quick. You'll have to merge layers as you go, but be mindful of how you merge them. These same layers will be used in the spec map, and having certain layers merged could be handy...
Repeat the process for each section of the body (or whatever you're adding fur to). Be mindful of the size of the hairs in relation to your character, as well as the flow and direction of the fur. Different animals have unique hair directions, which can actually be quite complex. You'll see things around the furry areas on the texture getting a little nasty. No worries. Just use your base color as a selection area at the end (when the tile layers are merged) to cut out the stray hairs.
Okay, so I'm done laying out the fur. I even decided to add more depth to the fur by overlapping these beads with some sections of fur (Examples A and B). Use "over layers" wherever you can to add flavor to your design. Keeping the flow and length of your fur attractive and accurate (Example C) will add worlds to the look of your finished texture.
One for the road...
I hope you learned something, and possibly enjoyed yourself trying out this method. Feedback is welcome.
It should be noted that I learned of this technique from a tutorial I saw a while back, but can't seem to find again. It had a kickass spear-wielding Panda Warrior, and used 3DS Max Fur. If you know who's tutorial that is, give them a high-five from me!
Portfolio - Looking for Work
A mind once stretched by an original idea, never regains its original dimensions.
Last edited by Polygoblin; 06-09-2011 at 04:18 AM. Reason: smaller pics for this forum (no auto re-size)
|The Following User Says Thank You to Polygoblin For This Useful Post:|
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Sunset Point- Modeling and Texturing Reel||mneubig||Modeling||11||02-02-2014 02:56 PM|
|human texturing using vray..?||heartscool||3ds Max||0||03-30-2011 07:27 AM|
|Dream house - Texturing & Lighting||hari||3D WIP||2||02-24-2011 04:21 AM|
|Help Needed with texturing||Legacy40k||2D WIP||1||10-15-2010 09:41 AM|
|Tips and trick for Texturing/Materials||noorjan||3ds Max||0||02-04-2010 06:24 PM|