CG-Hub

Belgian_Boolean · 11:51 PM

Hey all!

I've been stalking this sight for ages; and I figured it's about time I post something.

I'm currently, a 3d designer and instructor at Adidas; but my main passion is hard surface modeling. In my spare time, I started modeling the shuttle from Outland and have been sharing progress on Polycount.

If you don't know what Outland is, I made this handy explanation here.

This is a snapshot of the original model which was built by one of the guys who worked on the Nostromo from Alien.

And here's a mish mash of wip pics so far

http://img85.imageshack.us/img85/6862/52429521.jpg

stephenrminkin · 05-13-2012, 12:17 AM

Very nice hard surface work. This will make for some good reference material

Belgian_Boolean · 05-14-2012, 06:21 AM

Thanks man! Glad it can help ya

I'm detailing the top more and the end is in sight!

Ginsan · 05-15-2012, 02:56 AM

wow, well executed bro!!!

Belgian_Boolean · 05-22-2012, 07:41 AM

Cheers man!

I took a break for a few days, as I've been cracking on this for over month after work. Here's a lil update though.

Belgian_Boolean · 05-23-2012, 07:53 AM

Really starting to roll out detail along the top. Played with a shader a bit to show off the model more. Think I need to go back to using my render scene based off a recommendation on Polycount.

Belgian_Boolean · 05-24-2012, 05:54 AM

Hurt my back and didn't get much modeling done tonight. Did finalize the render scene though

Bushmaster · 05-24-2012, 11:55 AM

wow!!! very cool

Belgian_Boolean · 05-29-2012, 08:09 AM

Thanks man!

I added more detail across the sides, though I still need to fill in both of those big nooks. From there, gotta finish up the top and I'm done!

Belgian_Boolean · 05-30-2012, 08:44 AM

Finished the side compartments!

Belgian_Boolean · 05-31-2012, 07:13 AM

Added the thruster stabilizers

christophe_desse · 06-02-2012, 05:23 PM

insane amount of details .. really like how close to teh original design ref you did stay ( "" shoulder blade"" ..may be ..)

Belgian_Boolean · 06-12-2012, 07:08 AM

Thanks so much mate! That means a lot. I'm a big fan of your work!

I started work on the array. It's only shown in a few shots of the modeling being built. I think it helps the silhouette a bit though.

Belgian_Boolean · 06-16-2012, 05:03 PM

I finally finished it guys!

Here it is plus the original reference.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Space Shuttle	milivoj_popovic	3D Finished Work	1	04-20-2012 06:06 AM

CG-Hub

Members login

General

Challenges

2D Corner

3D Corner

(WIP) Outland Shuttle

Site Map

	Permalink #1
Belgian_Boolean Join Date: May 2012 Posts: 13 Member Thanks: 0 Thanked 0 Times in 0 Posts	(WIP) Outland Shuttle 05-12-2012, 11:42 PM Hey all! I've been stalking this sight for ages; and I figured it's about time I post something. I'm currently, a 3d designer and instructor at Adidas; but my main passion is hard surface modeling. In my spare time, I started modeling the shuttle from Outland and have been sharing progress on Polycount. If you don't know what Outland is, I made this handy explanation here. This is a snapshot of the original model which was built by one of the guys who worked on the Nostromo from Alien. And here's a mish mash of wip pics so far http://img85.imageshack.us/img85/6862/52429521.jpg Attached Thumbnails Last edited by Belgian_Boolean; 05-12-2012 at 11:51 PM.

	Permalink #2
stephenrminkin Join Date: Nov 2009 Posts: 21 Member Thanks: 0 Thanked 0 Times in 0 Posts	05-13-2012, 12:17 AM Very nice hard surface work. This will make for some good reference material

	Permalink #3
Belgian_Boolean Join Date: May 2012 Posts: 13 Member Thanks: 0 Thanked 0 Times in 0 Posts	05-14-2012, 06:21 AM Thanks man! Glad it can help ya I'm detailing the top more and the end is in sight!

	Permalink #4
Ginsan Join Date: Apr 2011 Posts: 46 Member Thanks: 0 Thanked 1 Time in 1 Post	05-15-2012, 02:56 AM wow, well executed bro!!!

	Permalink #5
Belgian_Boolean Join Date: May 2012 Posts: 13 Member Thanks: 0 Thanked 0 Times in 0 Posts	05-22-2012, 07:41 AM Cheers man! I took a break for a few days, as I've been cracking on this for over month after work. Here's a lil update though.

	Permalink #6
Belgian_Boolean Join Date: May 2012 Posts: 13 Member Thanks: 0 Thanked 0 Times in 0 Posts	05-23-2012, 07:53 AM Really starting to roll out detail along the top. Played with a shader a bit to show off the model more. Think I need to go back to using my render scene based off a recommendation on Polycount.

	Permalink #7
Belgian_Boolean Join Date: May 2012 Posts: 13 Member Thanks: 0 Thanked 0 Times in 0 Posts	05-24-2012, 05:54 AM Hurt my back and didn't get much modeling done tonight. Did finalize the render scene though

	Permalink #8
Bushmaster Join Date: Dec 2011 Posts: 65 Member Thanks: 1 Thanked 1 Time in 1 Post	05-24-2012, 11:55 AM wow!!! very cool

	Permalink #9
Belgian_Boolean Join Date: May 2012 Posts: 13 Member Thanks: 0 Thanked 0 Times in 0 Posts	05-29-2012, 08:09 AM Thanks man! I added more detail across the sides, though I still need to fill in both of those big nooks. From there, gotta finish up the top and I'm done!

	Permalink #10
Belgian_Boolean Join Date: May 2012 Posts: 13 Member Thanks: 0 Thanked 0 Times in 0 Posts	05-30-2012, 08:44 AM Finished the side compartments!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

	Permalink #11
Belgian_Boolean Join Date: May 2012 Posts: 13 Member Thanks: 0 Thanked 0 Times in 0 Posts	05-31-2012, 07:13 AM Added the thruster stabilizers

	Permalink #12
christophe_desse Join Date: Dec 2010 Posts: 46 Member Thanks: 0 Thanked 3 Times in 3 Posts	06-02-2012, 05:23 PM insane amount of details .. really like how close to teh original design ref you did stay ( "" shoulder blade"" ..may be ..) __________________ http://www.xtrm3d.com/

	Permalink #13
Belgian_Boolean Join Date: May 2012 Posts: 13 Member Thanks: 0 Thanked 0 Times in 0 Posts	06-12-2012, 07:08 AM Thanks so much mate! That means a lot. I'm a big fan of your work! I started work on the array. It's only shown in a few shots of the modeling being built. I think it helps the silhouette a bit though.

	Permalink #14
Belgian_Boolean Join Date: May 2012 Posts: 13 Member Thanks: 0 Thanked 0 Times in 0 Posts	06-16-2012, 05:03 PM I finally finished it guys! Here it is plus the original reference.