CG-Hub

SynchroDomo · 04-23-2012, 06:14 AM

Hello everyone,

I'm new here and I would like some critique on these 2 heads that I have made.
I am thinking on making another head soon and would like some tips on my current modeling before I start it.

Thanks

This head was my very first head model

SynchroDomo · 04-23-2012, 06:15 AM

and this was my second head

HijoDeFuego · 05-16-2012, 10:35 PM

You have a lot segments that you dont need. The best way to avoid running into this problem is by laying all your important loops down first. Look at the picture below, and see how he lays all the important loops down. The eyes, mouth, jaw, base of the skull etc. you will cleaner topology which is more important than the overall shape of the mesh itself, especially when it comes to animation.

Another way you could do it is by sculpting out the head in zbrush then retopologizing it later. Which every way you feel comfortable with. Hope I helped... Good Luck

HijoDeFuego · 05-16-2012, 10:38 PM

Oh yea and always use a reference

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Audi A6 [CCM261]	djoshua0521	3D WIP	4	11-13-2012 07:36 AM
Grand Piano WIP (CCM261)	jtsui	3D WIP	8	11-06-2011 04:23 AM
CCM261 '66 El Camino in Progress	robertgibbonsAi	Modeling	4	10-28-2011 07:47 PM
Human Head WIP(CCM261)	flie22	3D WIP	5	10-28-2011 07:23 PM
CCM261 Table	Mrnoital	3D Finished Work	0	10-28-2011 10:31 AM

CG-Hub

Members login

General

Challenges

2D Corner

3D Corner

Head Models (CCM261)

Looks cool

Site Map

	Permalink #1
SynchroDomo Join Date: Apr 2012 Posts: 2 Junior Member Thanks: 0 Thanked 0 Times in 0 Posts	Head Models (CCM261) 04-23-2012, 06:14 AM Hello everyone, I'm new here and I would like some critique on these 2 heads that I have made. I am thinking on making another head soon and would like some tips on my current modeling before I start it. Thanks This head was my very first head model Attached Thumbnails

	Permalink #2
SynchroDomo Join Date: Apr 2012 Posts: 2 Junior Member Thanks: 0 Thanked 0 Times in 0 Posts	04-23-2012, 06:15 AM and this was my second head Attached Thumbnails

	Permalink #3
HijoDeFuego Join Date: Apr 2012 Posts: 4 Junior Member Thanks: 0 Thanked 0 Times in 0 Posts	Looks cool 05-16-2012, 10:35 PM You have a lot segments that you dont need. The best way to avoid running into this problem is by laying all your important loops down first. Look at the picture below, and see how he lays all the important loops down. The eyes, mouth, jaw, base of the skull etc. you will cleaner topology which is more important than the overall shape of the mesh itself, especially when it comes to animation. Another way you could do it is by sculpting out the head in zbrush then retopologizing it later. Which every way you feel comfortable with. Hope I helped... Good Luck

	Permalink #4
HijoDeFuego Join Date: Apr 2012 Posts: 4 Junior Member Thanks: 0 Thanked 0 Times in 0 Posts	05-16-2012, 10:38 PM Oh yea and always use a reference

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)